Healthy homes standards: a plain-English checklist
Every private rental in New Zealand has had to meet the healthy homes standards since 1 July 2025. There are five of them: heating, insulation, ventilation, moisture and drainage, and draught stopping. This checklist covers what each one requires, the records landlords need to keep, and how homeowners can use the same standards as a benchmark for their own place.
The "If something happens to me" checklist
A printable checklist of everything your family would need: insurance, KiwiSaver, vehicles, pets, your will and who to call.
Who it applies to
All residential rentals, from day one of the tenancy
The standards became law in 2019 and were phased in. Since 1 July 2025 the phase-in is over: every private rental must comply, including at the start of a new tenancy. Kāinga Ora and registered community housing providers had to comply by 1 July 2024, and boarding houses by 1 July 2021.
The cost of getting it wrong
A landlord who doesn't meet their obligations is in breach of the Residential Tenancies Act and can be ordered to pay exemplary damages of up to $7,200. Tenancy Services also runs proactive checks. In 2024 it did about 1,100 assessments and found at least one breach in more than 500 of them.
1. Heating
The main living room must be able to be heated to at least 18°C.
Fixed heating in the main living room
- One or more fixed (not portable) heaters that directly heat the main living room, which is the largest room used for everyday living
- Each heater must be at least 1.5 kW, and together they must meet the room's calculated requirement
- Heat pumps and electric heaters must have a thermostat
- If the room needs more than 2.4 kW, plain electric heaters (other than heat pumps) don't count, with limited top-up exceptions for older heating
What doesn't count
Open fires and unflued combustion heaters such as portable LPG bottle heaters don't meet the standard.
Work out the size you need
Use the free heating assessment tool on the Tenancy Services website. Keep the report it produces, because it can be used as evidence that the heating requirement is met.
2. Insulation
Ceiling and underfloor insulation, wherever it can reasonably be installed.
Minimum R-values
For homes consented before 3 November 2022, the minimums depend on climate zone:
- Zones 1 and 2: ceiling R2.9, underfloor R1.3
- Zone 3: ceiling R3.3, underfloor R1.3
Tenancy Services has a map showing which zone your property is in.
Existing insulation
Ceiling insulation installed before 1 July 2016 generally needs to be at least 120 mm thick. It must also be in reasonable condition, with no mould, dampness, damage or gaps. New insulation should be installed to NZS 4246:2016.
Exemptions
Exemptions include parts of the house a professional can't safely or reasonably reach (insulate those later, for example when the roof is replaced) and floors or ceilings with a habitable space directly above or below. Some homes with low-pitched roofs or limited ceiling space can make up for it with extra insulation elsewhere.
3. Ventilation
Windows that open
Living rooms, dining rooms, kitchens and bedrooms each need at least one window, door or skylight that opens to the outside and can be fixed open. The openable area must add up to at least 5% of the room's floor area.
Extractor fans in kitchens and bathrooms
Every kitchen and bathroom needs an extractor fan venting outside, or a qualifying continuous mechanical ventilation system. Fans installed after 1 July 2019 must be at least:
- Kitchen: 150 mm diameter (including ducting) or 50 L/s
- Bathroom: 120 mm diameter (including ducting) or 25 L/s
Older fans can stay if they vent outside and work properly. Once one fails, the replacement must meet the current rules. Recirculating systems such as HRV and DVS don't satisfy this part on their own.
4. Moisture ingress and drainage
Gutters, downpipes and drains
The property must drain stormwater, surface water and groundwater efficiently to an appropriate outfall, with gutters, downpipes and drains taking water off the roof. Blocked or broken guttering is one of the easiest ways to fall foul of this one.
Ground moisture barrier
If the house has an enclosed subfloor, a ground moisture barrier is needed where one can be installed. This is usually a polythene sheet laid to NZS 4246:2016, which owners can install themselves. If a professional can't reasonably reach the subfloor, an exemption may apply.
5. Draught stopping
Gaps, holes and fireplaces
Unreasonable gaps or holes in walls, ceilings, windows, skylights, floors and doors that cause noticeable draughts must be fixed. Unused open fireplaces must be closed off, or their chimneys blocked, so no air flows through.
Records and paperwork
Being compliant isn't enough. You need to be able to show it.
Compliance statement
Most new or renewed tenancy agreements must include a signed statement setting out the property's current level of compliance with each standard. Tenancy Services provides a template.
Keep the evidence
Landlords must keep the records and documents that show how they comply and make them available on request. Tenants can ask for this information, and the landlord must provide it within 21 days. Useful things to keep:
- The heating assessment tool report
- Heater, heat pump and extractor fan specifications, invoices and installer details
- Insulation installer certificates, or photos showing type, thickness and coverage
- Photos of the ground moisture barrier and draught-stopping work
- Receipts for gutter, drainage and maintenance work, with dates
- Any professional healthy homes assessment
Compliance isn't a one-off
The standards apply for the whole tenancy, so a fan that stops working or a gutter that blocks can put a compliant property out of compliance. Regular checks and servicing are part of staying compliant.
Not a landlord? Use it as a benchmark
A good minimum for any Kiwi home
The healthy homes standards only legally apply to rentals, but they're a sensible baseline for owner-occupied homes too. A house that meets them is warmer, drier and cheaper to heat. Work through the checklist above and you'll have a prioritised list of improvements. Fixing extractor fans, adding a ground moisture barrier and stopping draughts are usually the cheapest wins.
Keep the heat pump, fans and paperwork on track
HomeTrack's asset register stores your heat pump, extractor fans and other appliances with their model, serial number, purchase details and warranty, and warns you before the warranty runs out. You can set recurring reminders for heat pump servicing, gutter clearing and filter cleaning, so the things that keep a home healthy don't slip.
Start your 30-day free trial → No credit card required · Made in New ZealandCommon questions
Do all rentals have to meet the healthy homes standards?
Yes. Since 1 July 2025 all private rental homes in New Zealand must comply with the healthy homes standards, unless a specific exemption applies.
What is the penalty for not meeting the healthy homes standards?
A landlord who doesn't meet their healthy homes obligations is in breach of the Residential Tenancies Act 1986 and can be ordered to pay exemplary damages of up to $7,200.
What size heater does a rental need?
It depends on the main living room. The heating must be able to keep that room at 18°C or more. Tenancy Services' free heating assessment tool calculates the minimum capacity, and each qualifying heater must be at least 1.5 kW.
Does an HRV or DVS system meet the ventilation standard?
Not on its own. Recirculating systems don't meet the kitchen and bathroom requirement. Those rooms need an extractor fan or rangehood venting outside, or a continuous mechanical ventilation system that extracts to the outdoors.
Can a tenant ask to see proof of healthy homes compliance?
Yes. Tenants can ask for information about compliance, and the landlord must provide it within 21 days.
This guide summarises the standards as at November 2026 and isn't legal advice. For the full rules, exemptions and the zone map, see Tenancy Services.